April 06, 2017
SHAMIM MOBILE LAB Nilphamari
S2 Official Firmware, Flashtools & Drivers Download Link: https://www.mediafire.com/?0fawlk80ujghz4z
First: Install the driver
Please double-click on the program to install.
Program [GN_QC_EN_Driver_V1.1.0.0.exe]
Second: Download instructions
Before download, Need to check the following point:
Need to select USB connection mode to "Charge Mode" in order to identify the port and start downloading (The default USB connection mode is "Charge Mode").
Download tool： GNQC_DownLoadV1.6.8.0_EN.rar
After Downloading complete, please follow the steps：
1. Open GNQC_DownLoad flash tools
2.
Click on the "BP Path" Button and "AP Path." Buttons and select BP and
AP from software，Download mode drop-down(DL Mode) options is
choose"General download (BP + AP)…
3. Connect Mobile with PC (Mobile must be remain off) and after found port then click download. Then start downloading….
4. Wait until the appears as shown in below figure,then the download is completed：
5. After the download completed, wait a few seconds, the phone automatically restart, the whole process is over。
6. To get all apps after on handset give the “Factory data reset”
First: Install the driver
Please double-click on the program to install.
Program [GN_QC_EN_Driver_V1.1.0.0.exe]
Second: Download instructions
Before download, Need to check the following point:
Need to select USB connection mode to "Charge Mode" in order to identify the port and start downloading (The default USB connection mode is "Charge Mode").
Download tool： GNQC_DownLoadV1.6.8.0_EN.rar
After Downloading complete, please follow the steps：
1. Open GNQC_DownLoad flash tools
4. Wait until the appears as shown in below figure,then the download is completed：
5. After the download completed, wait a few seconds, the phone automatically restart, the whole process is over。
6. To get all apps after on handset give the “Factory data reset”
0 comments:
Post a Comment